Channel Marker - GE Television User Manual

Getting Started
Dipole Antenna (Supplied)
4
1
Slot
2
Antenna Adapter (Supplied)
7:17
Sleep
Mute
The Channel Marker shown is
just an example of what your
screen may look like.
2
Graphics contained within this publication are for representation only.
Insert the antenna base into the pocketed slot on the back of
your set. Stand at the back of your set with the antenna
twin-lead facing you, and press the base of the antenna into
the slot until it locks in place.
Connect the ends of the twin-lead to the Antenna Adapter
(supplied).
Base
Connect the Antenna Adapter to the ANTENNA connector on
the back of the TV.
Later, after you've turned on the TV, adjust the length and
position of the antenna rods for best reception.
• For viewing VHF channels, extend the rods fully.
• For viewing UHF channels, shorten the rods for best
Twin
Lead

Channel Marker

ANTENNA
3
The Channel Marker comes up when you first turn on the TV,
change channels, or press the DISPLAY button.
01:30 Displayed to count down time left on the commercial
skip timer.
13 Displays the current channel.
7:17 Displays the current time.
13
CC
CC Displayed when Closed Captioning is available.
Mute Displayed when you mute the audio.
Sleep Displayed when the Sleep Timer has been set.
1:30
reception.
You can press MENU or CLEAR to make the Channel Marker
disappear, or it will disappear automatically after a short
time.
Chapter 1