Canon DC100 Instruction Manual page 70

70
Message Explanation
CD
CANNOT DIVIDE THE Photomovie scenes cannot be divided. 60
SCENE
You may not be able to divide very short scenes.
-
Scenes cannot be divided when the disc already contains 999
-
s'cenes.
You may not be able to further divide scenes shorter than 5
-
seconds that were created by dividing a previous scene.
DISC IS FINALIZED You cannot record additional scenes on a finalized DVD-R disc.
-
CANNOT RECORD
You cannot record additional scenes or unfinalize a DVD-RW disc -
in VIDEO mode that was finalized with another digital device.
UNFINALIZE THE DISC You cannot record additional scenes or convert still images to a
63
Photomovie scene on a finalized DVD-RW in VIDEO mode.
Unfinalize the disc first.
DISC IS PROTECTED The disc is protected. Replace the disc or remove the disc 57
protection.
DISC ERROR
Initialize new DVD-RW discs before using them. 57
CANNOT READ THE Disc could not be read. Try cleaning it or replace the disc. 72
DISC
This message can also appear if the camcorder has exceeded its
-
CHECK THE DISC
operational temperature. Disconnect the power adapter and
remove the battery and let the camcorder cool down before
resuming use.
This message can also appear if condensation has formed. Wait 73
until the camcorder dries completely before resuming use.
The disc may not be loaded correctly. Try removing the disc and 22
reinserting it.
The disc is not initialized. Initialize the disc. 57
DISC ACCESS FAILURE There was an error when reading the disc or attempting to write 72
CHECK THE DISC onto it. Try cleaning the disc or replace it.
This message can also appear if condensation has formed. Wait 73
until the camcorder dries completely before resuming use.
The disc may not be loaded correctly. Try removing the disc and 22
reinserting it.
DISC COVER IS OPEN Verify the disc is correctly inserted and close the disc cover. 22
NO DISC No disc is loaded. Insert a disc. 22
You inserted a disc recorded in a different Television System (PAL
-
orSECAM).
This message can also appear if condensation has formed. Wait 73
until the camcorder dries completely before resuming use.
LOADING THE DISC The disc is being read. Wait before you start recording. -
AVOID MOVING THE Try not to move the camcorder while the image is being recorded.
-
CAMCORDER
UNABLE TO RECOVER Could not recover a corrupted file.
-
DATA
This message can also appear if condensation has formed. If you 73
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use.
DISC FULL The disc is full ("
0
END" flashes on the screen) . Delete some 22
recordings (DVD-RW in VR mode) to free some space or replace
55
the disc.