Tv Using The Shutter-Priority Ae Mode - Canon DC100 Instruction Manual

~
If the optimal exposure cannot be obtained, try the following actions.
~
0 Manually adjust the exposure (CO 43).
o
Change the metering method (CO 43).
,I~n;U,;&;i,lJgtn,l,b;~;.;;.S·;b;u;tt~;;t;.et;i;gt;i.iM;{AJ;@,I\D{g;"~
,·····'·;;li}1;;@;S·,
You can select a shutter speed, and the camcorder automatically sets the aperture setting
most appropriate for the subject. Select a high shutter speed for recording fast moving
subjects, and a slow shutter speed to add a motion blur to moving objects, enhancing the
feel of movement of the image.
I
To change the operating mode, refer to About the Operating Modes (CO 11).
Mode switch: P
P
flmID
seN
L.. ••• --l
Shutter speed guideline
(CAMERA .-" ) (CAMERA'
Q )
1/8,1/15,1/30 1/2,1/4,1/8,
1/15,1/30
For recording subjects in dark places.
1/60 1/60 For general recordings.
1/100 1/100 For recording indoor sports scenes.
For recording from within a car or train, or for
recording moving subjects such as roller coasters.
For recording outdoor sports such as golf or tennis
on sunny days.
1/250, 1/500
1/2000
1/250, 1/500,
1/1000
1. Select the recording program
[Tv SHUTTER-PRIO.AE] as described in Selecting
the Recording Program (CD 40).
2. Press
(@ ).
3. Change (AT) the shutter speed and press (@) to save the setting.
o
The shutter speed denominator flashes when the selected shutter speed is not
appropriate for the recording condition. In such case, readjust the shutter
speed.
o
When using a slow shutter speed in dark places, you can obtain a brighter
image, but the image quality may be lower, and the autofocus may not work
well.
o
Do not point the camcorder directly at the sun when the shutter speed is set to
1/1000 or higher.
o
The image may flicker when recording with high shutter speeds.
o
Recording movies under fluorescent lights: In
fillIID
mode and when the
recording program is set to [P PROGRAM AE] or
[PJ
NIGHT] (SCN), the
camcorder automatically detects the flicker of fluorescent lighting and adjusts
the shutter speed accordingly. However, if the screen starts to flicker, select
[Tv
SHUTTER-PRIO.AE] and set the shutter speed to 1/100.
41