Usb Operations - Hyundai H-1404 Instruction Manual

Instruction manual
• At anytime during playback, press USB/
PLAY/PAUSE button to pause operation of the
unit. Press this button to resume operation at
the same track and position.
• At anytime during playback, press STOP
button to stop operation of the set. This will
reset the CD-player to the first track (if you
press USB/PLAY/PAUSE after STOP, the first
track will always start playing).
• At anytime during playback, press BACK/
NEXT buttons to skip backwards or forwards
by one track, as desired.
• At anytime during playback, press and
hold BACK/NEXT buttons to fast-reverse
(review) or fast-forward (cue) the specific track,
which is currently playing.
MP3 disc playback
• Insert an MP3 disc, close the CD door.
• Slide FUNCTION switch to "CD/MP3/USB"
position.
• The disk will spin and perform a full check
of the disc to count the total number of songs.
Then playback of the first song (track) will
begin and the display will indicate the current
track no: (001).
• If your disc has folders (see below) the
display will show the folder number (e.g. F01,
F02, etc) every 5 seconds.
• At any time during playback, press BACK
or NEXT buttons to skip backwards or forwards
by one track.
• If your MP3 disc has no folders, you can
use SKIP+10/FOLDER button to skip 10 songs
ahead. This is useful if you have many songs
on you want to quickly skip to a particular song.
• Press SKIP+10/FOLDER button several
times until you reach a song number near to
your desired song, and then press BACK or
NEXT buttons repeatedly to arrive and the
exact song you desire.
• If your MP3 disc has folders, you can select
a folder to playback by pressing and holding
SKIP+10/FOLDER button for about 2 seconds.
• Each time you press and hold SKIP+10/
FOLDER button (for 2 seconds), the player
skips to the first song in the next folder. The
4
display will alternate between the song number
and the folder number every 5 seconds.

USB operations

• Insert a USB drive into the USB socket.
• Set FUNCTION switch to "CD/MP3/USB"
position.
• Display will show total folders (if it has
folders) and total tracks. Then playback of the
first song (track) will begin and the display will
indicate the current track number.
• At any time during playback, press BACK/
NEXT buttons to skip backwards or forwards
by one track.
• You may also use SKIP+10/FOLDER,
USB/PLAY/PAUSE, STOP buttons in the same
manner as with CD/MP3 disc playback.
Switching from CD/MP3 mode to
USB mode
Press STOP button. Insert a USB drive into
the USB socket. Press and hold USB/PLAY/
PAUSE button until the display shows "USB".
Then the first song will start playback.
Switching from USB mode to CD/
MP3 mode
Press STOP button. Press and hold USB/
PLAY/PAUSE button for above 2 seconds. The
disk will spin and perform a full check of the
disc to count the total number of songs. Then
the first song will start playback.
Never remove (or unplug) USB-drives from
the unit during playback of songs from this
media. Always press STOP button first, and then
press and hold for 2 seconds USB/PLAY/PAUSE
button to switch to "CD" mode before removing
or unplugging USB memory, to prevent damage
to your files or memory devices.
Although this product is fully compatible
with USB 1.1 and 2.0 standards, a small
percentage (about 5%) of USB flash drives
might not be readable, due to those USB-flash
drive manufacturers non-compliance with the
official USB 1.1/2.0 standards. Maximum USB
capacity supported is 4 Gbs.