Dell Metered Rack Power Distribution Unit User Manual page 84

Table of Contents

Table 28. Input Statistics (Fortsetzung)

Table

Attribute

PDU Input Remaining Active Power (W)

PDU Overload State

Input Power

PDU Input Peak Headroom Watts

Statistics

(Values provided for Watts and Time)

PDU Input Peak Consumption Watts

(Values provided for Watts and Time)

PDU Input Cumulative kWh

(Values provided for Watts and Time)

Input Thresholds

Phase 1 Current Thresholds (A)

Phase 2 Current Thresholds (A)

Phase 3 Current Thresholds (A)

Web Interface Operation

Description

Provides the watts capacity remaining.

NOTE: When the rPDU is in an overload state, this value

is always 0.

Present total watts (W) reading for all three phases is

compared to the value configured as the overload alarm

threshold. Either no threshold is triggered, or the

threshold has been surpassed.

Provides the remaining watts available to support the

load at peak demand. Provides a time and date stamp of

the most recent data update. Click Reset to clear this

value to the maximum value for this model and reset the

time to the present time.

Provides the peak power demand on the rPDU. Provides

a time and date stamp of the most recent data update.

Click Reset to clear this value to zero (0) and reset the

time to the present time.

Provides the total kWh usage. Provides a time and date

stamp of the most recent data update.

NOTE: This value accumulates. If this value reaches the

maximum value for a 32-bit number, do not reset.

Click Reset to clear this value to zero (0) and reset the

time to the present time.

Low Warning: Causes an alarm when the input current

amperage (A) reading falls below the low warning