Identification (What Is What?); Starting Reminder - McCulloch CS 360T Operator's Manual

IDENTIFICATION OF SYMBOLS

Starting Reminder

Move ON/STOP switch to
the ON position.
Slowly press primer bulb
6 times.
Pull choke/fast idle lever
out to the full extent (to
the FULL CHOKE posi-
tion).

IDENTIFICATION (WHAT IS WHAT?)

Chain
Front Hand Guard
Adjustment Tool
(Bar Tool)
Chain
Bar Oil Fill Cap
Bumper
spike
Cylinder Cover
Throttle
Lock-out
Rear
Handle
Clutch
Throttle Trigger
Cover
Starting a warm engine
Muffler
Starter Housing
Chain
Outer
Catcher
Bar
Tensioning
Knob
Ring
3
Pull the starter rope
sharply with your right
hand until the engine fires.
Push the choke/fast idle
lever in to the HALF
CHOKE position.
Pull the starter rope sharply
with your right hand until
the engine starts.
Front Handle
Idle Speed Screw
Starter Rope
ON/STOP
Switch
Fuel Mix Fill Cap
Chain
Brake
Guide Bar
Choke/Fast
Idle Lever
Primer Bulb
Chain
Direction
of Travel