Identification Of Symbols - McCulloch CS 330 Operator's Manual

Starting Reminder
Move ON/STOP switch to
the ON position.
Slowly press primer bulb
6 times.
Pull choke/fast idle lever
out to the full extent (to
the FULL CHOKE posi-
tion).
IDENTIFICATION (WHAT IS WHAT?)
Chain
Adjustment Tool
(Bar Tool)
Chain
Bumper
spike
Cylinder Cover
Throttle
Lockout
Rear
Handle
Throttle
Clutch Cover
Trigger

IDENTIFICATION OF SYMBOLS

Starting a warm engine
Front Hand Guard
Muffler
Bar Oil Fill Cap
Starter Housing
Bar Nuts
Pull the starter rope
sharply with your right
hand until the engine fires.
Push the choke/fast idle
lever in to the HALF
CHOKE position.
Pull the starter rope sharply
with your right hand until
the engine starts.
Front Handle
Starter Rope
Fuel Mix Fill Cap
Chain
Brake
Adjusting Screw
Chain
Catcher
3
Idle Speed Screw
ON/STOP
Switch
Choke/
Fast Idle
Lever
Primer Bulb
Chain
Direction
of Travel
Guide Bar