Table of Contents
Advertisement
SERVICE
1.
Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a
risk of injury.
2.
When servicing a tool, use only identical replacement parts. Follow
instructions in the Maintenance Section of this manual. Use of unautho-
rized parts or failure to follow Maintenance Instructions may create a risk of
shock or injury.
SPECIFIC SAFETY RULES AND SYMBOLS
1.
Hold tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring. Contact with a "live" wire
will also make exposed metal parts of the tool "live" and shock the operator.
2.
Be aware that this tool is always in an operating condition, because it
does not have to be plugged into an electrical outlet. Always set the trigger
switch to the locked OFF position when installing or removing the battery pack
or saw blade.
3.
Do not use bits larger than those recommended (see Maximum
Capacities Chart). Large bits may overload the drill and damage the motor and
gears.
4.
Do not use if chuck jaws or other parts are cracked or worn.
5.
Verify the drill's rotation before starting the drill so it is correct for the
operation being performed.
6.
Never change direction of rotation until motor has completely stopped.
7.
Never hold work in your hand, lap, or against other parts of your body
when drilling.
8.
Do not use drill as a router or try to elongate or enlarge holes by twisting
the drill. Drill bits may break and cause injury.
9.
Keep hands away from rotating parts.
10. Keep drill bit clear of yourself and all objects while installing and remov-
ing bits (see INSTALLING AND REMOVING BITS).
11. Some wood contains preservatives which can be toxic. Take extra care
to prevent inhalation and skin contact when working with these materials.
Request, and follow, all safety information available from your material supplier.
12.
designed. Delta strongly recommends that this tool NOT be modified and/or
used for any application other than for which it was designed. If you have
any questions relative to its application DO NOT use the tool until you have
written Delta and we have advised you.
SYMBOL
V
.......................... volts
A
.......................... amperes
Hz
.......................... hertz
W
.......................... watts
PSI
.......................... pounds per square inch
Min.
.......................... minimum
Max.
.......................... maximum
in.
.......................... inch
MM
.......................... millimeters
There are certain applications for which this tool was
DEFINITION
Delta Machinery
Technical Service Manager
4825 Highway 45 North
Jackson, TN 38305
4
Hide quick links:
Advertisement
Table of Contents
