Advertisement
Quick Links
E N G L I S H
CORDLESS TRIM SAW DW935K2/DW936K2
Congratulations!
You have chosen a D
E
experience, thorough product development and
innovation make D
WALT one of the most reliable
E
partners for professional Power Tool users.
Table of contents
Technical data
EC-Declaration of conformity
Safety instructions
Package contents
Description
Electrical safety
Mains plug replacement (U.K. & Ireland only)
Using an extension cable
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Technical data
Voltage
Max. power output
No load speed
Blade diameter
Depth of cut
Blade body thickness
Blade bore
Bevel angle adjustment
Weight (without battery pack) kg 3.3
Battery pack
Voltage
Capacity
Weight
Charger
Mains voltage
Charging time
Weight
Fuses:
Europe
230 V tools
U.K. & Ireland
230 V tools
en - 1
WALT Power Tool. Years of
DW935K2 DW936K2
V 14.4
18
W 340
340
-1
min
3,000
3,200
mm 136
136
mm 41
41
mm 1.1
1.1
mm 10
10
0 - 50°
0 - 50°
3.3
DE9091
DE9095
V 14.4
18
Ah 2.0
2.0
kg 0.7
0.7
DE9107
DE9108
V 230
230
h 1
1
kg 0.4
0.4
10 Amperes, mains
13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-
observance of the instructions in this manual.
Denotes risk of electric shock.
en - 1
en - 1
en - 2
Fire hazard!
en - 4
en - 4
EC-Declaration of conformity
en - 4
en - 5
en - 5
DW935K2/DW936K2
en - 5
D
WALT declares that these Power Tools have been
en - 6
E
designed in compliance with: 89/392/EEC,
en - 7
89/336/EEC, 73/23/EEC, EN 50144, EN 55104,
en - 8
EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
address below or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
89/392/EEC, measured according to EN 50144:
L
(sound pressure)
pA
L
(acoustic power)
WA
* at the operator's ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144:
WALT at the
E
DW935K2
dB(A)*
84.4
dB(A)
92
DW935K2
< 2.5 m/s
2
DW936K2
83
91
DW936K2
< 2.5 m/s
2
16
Advertisement
Related Manuals for DeWalt DW935K2
Summary of Contents for DeWalt DW935K2
- Page 1 E N G L I S H CORDLESS TRIM SAW DW935K2/DW936K2 Congratulations! The following symbols are used throughout this manual: You have chosen a D WALT Power Tool. Years of experience, thorough product development and Denotes risk of personal injury, loss of life or...
- Page 2 E N G L I S H Director Engineering & Product Development 7 Wear safety goggles Horst Großmann Also use a face or dust mask in case the operations produce dust or flying particles. 8 Beware of maximum sound pressure Take appropriate measures for the protection of hearing if the sound pressure of 85 dB(A) is exceeded.
- Page 3 E N G L I S H 16 Remove the battery pack Use only with D WALT battery packs, Remove the battery pack when not in use, others may burst, causing personal injury before servicing and when changing accessories. and damage 17 Have your tool repaired by an authorized WALT repair agent This Power Tool is in accordance with the...
- Page 4 7.2 to 14.4 V Release the switch immediately if the blade sticks (DW935K2) or 7.2 to 18 V (DW936K2) or the saw stalls. • Keep the saw blades sharp.
- Page 5 E N G L I S H Mains plug replacement Battery pack (fig. A) (U.K. & Ireland only) • Should your mains plug need replacing and you Charging the battery pack are competent to do this, proceed as instructed When charging the battery pack for the first time, below.
- Page 6 E N G L I S H Instructions for use Bevel adjustment (fig. A & B) The bevel angle can be adjusted between 0° and 50°. • Loosen the bevel adjustment knob (6). • Always observe the safety instructions • Set the bevel angle by tilting the saw shoe (12) until and applicable regulations.