Lens Disassembly Procedure - Panasonic Lumix DMC-FZ200P Service Manual

8.4.

Lens Disassembly Procedure

Precaution:
1. Do not remove the MOS unit when disassembling or re-
assembling the lens in order to maintain it clean.
The screws for fixing the MOS unit to the master flange
unit are locked by glue with the adjustment of the installa-
tion angle of the MOS unit to the lens (optical axis adjust-
ment) finished.
When remove it, refer to item "8.5.".
2. Keep dust or dirt away from the lens.
To remove dirt or dust from the lens, blow with dry air.
3. Do not touch the lens surface.
4. Use lens cleaning KIT (VFK1900BK).
5. Apply grease as shown on item "8.4.8." and "8.4.9." in the
figure.
8.4.1. Removal of the Lens Flex Unit
1. Unscrew the 2 screws (A).
2. Remove the 10 Ribs.
3. Remove the 3 connector.
4. Remove the lens flex unit.
8.4.2. Removal of the Master Flange Unit
1. Unscrew the 3 screws (B).
2. Remove the master flange unit.
35