GE Profile PDCF1NBW Technical Service Manual page 19

3 3
ATTACH AND SECURE THE
1
DRAWER FRONT TO THE SLIDES
A Pull out the rail assemblies to the full
length on each side of the cabinet.
B Drive the top screw into the door on each
side until it is 1/2 way in.
Screw
Hang the drawer front onto open slots on
C
the slides.
Slot
– 19 –
4 4
ATTACH AND SECURE THE
1
DRAWER FRONT TO THE SLIDES
(CONT.)
D Drive screws fully. (There are 10 screws.)
Screw
Step D2:
Drive
fully.
Step D3:
Drive
screws
in these
holes.
5 5
2 REPLACE THE FREEZER BASKET
Replace the lower freezer basket by
lowering it into the frame.
6
Step D1:
Line up
screw
hole in
freezer
drawer
and
drive
fully.