Tools, Supplies And Required Equipment - Traxxas E Revo 5605 Owner's Manual

Tools, Supplies and Required Equipment

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
SUPPlIED ToolS AnD EQUIPMEnT
Shock wrench 5mm turnbuckle wrench
Glow plug
1.5mm "L" wrench
wrench
Long Travel rocker and spring set
Required Tools and Equipment
8 AA alkaline Two NiMH battery packs (7.2V 6-cell
batteries or 8.4-volt 7-cell [recommended])
Warning: Lithium Polymer (LiPo) batteries should not be used with the EVX-2. The EVX-2 electronic speed control is not equipped with low-voltage detection.
Suspension multi-tool
2.0mm "T" wrench
Suspension tuning
Body clips
shims and hollow balls
(sold separately)
NiMH battery charger
(peak detecting type recommended - see sidebar)
Antenna nut wrench
4-way wrench
3.0mm "L" wrench 2.5mm "T" wrench
Maximum Travel
Battery Retainers
Steering Stop
For more information on
batteries, see Use the Right
Batteries on page 10.
A peak-detecting charger
is recommended for best
performance and longest
battery life. For more
information, see Use the
Right Charger on page 12.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
E-Revo • 5