Power Wheels Instructions Manual page 12

Super 6 and 12 Volt Vehicles with Connector Covers
Super
6 Volt
• Use the H-Style Wire Harness Converter included to bridge the
connectors on your battery(ies) and charger. Plug the A-style connector
on the wire harness converter into the A-style connector(s) on your
new battery(ies). Plug the H-style connector (with black cover) at the
other end of the wire harness converter into the H-style connector
cover (with white cover) on your charger. Make sure all connectors are
completely joined.
• Plug the charger into a standard wall outlet. Charge the battery for at
least 18 hours, but not longer than 30 hours.
Note: If power flow to the wall outlet is controlled by a switch, make
sure the switch is ON.
• Once the battery is charged, disconnect the battery and charger
connectors and unplug the charger from the wall outlet.
• Use the H-Style Wire Harness Converter to connect the battery(ies)
to your vehicle's motor harness connector, too. Leave the A-style con-
nector(s) on the wire harness converter(s) plugged into the con-
nector(s) on the battery(ies). Plug the H-style connector (with black
cover) on the other end of the wire harness converter into your
vehicle's motor harness connector (with blue cover). Consult your
vehicle Owner's Manual for detailed battery installation, vehicle
operation and use instructions.
Charging the Battery
12 Volt
12