Power Wheels Instructions Manual page 11

6 Volt (Standard) Vehicles
With
H-Style Wire
Harness
Converter
• Use the H-Style Wire Harness Connector (included) to bridge the
connectors on your battery and charger. Plug the A-style connector on
the wire harness converter into the A-style connector on the battery.
Plug the H-style connector on the other end of the wire harness
converter into the H-style connector on your charger. Make sure all
connectors are completely joined.
• Plug the charger into a standard wall outlet. Charge the battery for at
least 18 hours, but not longer than 30 hours.
Note: If power flow to the wall outlet is controlled by a switch, make sure
the switch is ON.
• Once the battery is charged, disconnect the battery and charger
connectors and unplug the charger from the wall outlet.
• Use the H-Style Wire Harness Converter to connect the battery to
your vehicle's H-style motor harness connector, too. Leave the A-style
connector on the wire harness converter plugged into the connector on
the battery. Plug the H-style connector on the other end of the wire
harness converter into your vehicle's motor harness connector. Consult
your vehicle Owner's Manual for detailed battery installation, vehicle
operation and use instructions.
Charging the Battery
11