Lcd Support Plate Installation - Gateway TP-A60W Service Manual

LCD Support Plate Installation

0
1. Connect LVDS cable (F) to LCD panel connector (f). (Figure 3-67)
2. Install and secure adhesive tape (E) covering LVDS cable and LCD panel connector.
3. Connect and secure control board FFC (D) to board connector (d). (Figure 3-66)
4. Install LCD support plate on bezel. (Figure 3-65)
5. Install and secure screws (C) to bezel. (Figure 3-64)
6. Install and secure antenna cables to LCD support plate guides (B). (Figure 3-63)
7. Install and secure Mylar tape (A) to LCD support plate. (Figure 3-62)
8. Install speakers.
ID Size Quantity Screw Type
C M2.0x3.0 2
3-47
Machine Maintenance Procedures