Usb Module Installation - Gateway TP-A60W Service Manual

4. Remove module (C). (Figure 3-60)
Figure 3-60. Removing USB Module

USB Module Installation

1. Align module with bezel guides (D). (Figure 3-61)
Figure 3-61. Aligning USB Module to Bezel Guides
2. Install module (C) on bezel. (Figure 3-60)
3. Install and secure screws (B) to bezel.
4. Install and connect module FFC (A) to module connector (a).
5. Install speakers.
Machine Maintenance Procedures
ID Size
A M2.0x4.0 Ni
(Figure 3-59)
Quantity Screw Type
2
C
B
(Figure 3-58)
3-43
0