Air-O-Swiss AOS U600 Quick Setup Manual

PLEASE READ FIRST
1
Finding the ideal location for your
unit: Do not place the humidifier
directly next to a heating or air vent.
SOAK CARTRIDGE 24 HOURS BEFORE FIRST USE
5
24 h
FILL THE TANK WITH FRESH COLD WATER
6
Take off the water tank cap to fill
the tank with water.
QUICK OPERATION DESCRIPTION AOS U600
B E D A
C
WATER QUALITY MAINTENANCE WITH HYDRO STICK
Water Quality Maintenance
The AIR-O-SWISS Hydro Stick 7017 keeps AIR-O-SWISS
humidifiers operating at their highest level between recommend-
ed cleanings*. Good for one year, the Hydro Stick ensures the
humidifier's functionality while providing fresh humidification
performance.
*Refer to the user manual for proper cleaning instructions.
Please read the manual or check our website www.airoswiss.net for further information.
QUICK SET UP GUIDE AOS U600
2
The unit should be placed in an
elevated position, e.g. on a table,
chest, etc. at least 3 ft off the floor.
Keep it away from doors or win-
dows.
Soak the demineralization cartridge in a water bath for 24 hours before the
first use; the granules have to absorb water to reach maximum performance.
WARNING! If the cartridge is soaked in the tank, make sure to exchange the water and empty
the water from the base before using the humidifier.
7
Fill the tank with clean, cold water
from the tap.
A On/Off dial and mist output regulation
B Hygrostat
(setting the humidity level)
C Operation with pre-heating
(warm mist)
D Pre-heating indicator
E
Empty Indicator
DO NOT DISCARD! Save for future reference.
3
The mist outlet must not be pointed
directly at plants or other objects.
Keep a distance of at least 20 in-
ches (50cm).
8
Do not pour water into the mist
outlet of the appliance.
4
WARNING! Do not touch the
water in the base during operation!
Switch off the unit first. Place the
Ionic Silver Stick in the base of the
unit.
9
Close the cap of the water tank
securely, place the water tank onto
the base. The water is now running
from the tank into the base. The
empty indicator light may stay
illuminated for some seconds until
the base is filled with water.
Lifecycle Indicator
Your appliance comes with a lifecycle indicator
for changing the Hydro Stick. To remind yourself
of when you put the Hydro Stick into operation,
please cross the current month on the stamp and
write the current year on the line provided.
10
Insert the plug into the socket and
switch on the appliance using the
On/Off dial.