DAMAGED CORD WARNING: The Air Shield is equipped with a polarized plug, that is one blade is Wide Slot wider than the other. The polarized plug is a safety device to reduce the risk of fire, shock and personal injury and is intended for use in a polarized outlet.
Advanced PureAir Air Shield Owner’s Manual CONTROLS & AIR FLOW VENTS Front Face Plate Air Outlet ION-UV INDICATOR Dust Sensor CLEAN METAL GRID with ultra-violet technology QUIET REPLACE FILTER AUTO RESET CLEAN AIR MONITOR FLOW TIMER ODOR DUST ALLERGEN POWER...
Advanced PureAir Air Shield Owner’s Manual BEFORE USE Pre-Installation Air Ventilation Open Windows for Air Ventilation Before plugging in the unit, please open the windows in the area where you will be using the unit. Ventilate the area for 2-3 hours if possible.
Advanced PureAir Air Shield Owner’s Manual EXPLANATION OF INDICATORS Negative Ion Indicator During the process when negative ions are generated, the blue indicator on the Soft Touch Control Panel will gradually change from bright to dim and from dim back to bright every 5seconds.
Page 7
Locate the Unit Place the Air Shield against a wall, near an electric outlet with 12-15 inches clearance on the front and sides. It is best to place the unit where it will be out of any children's play area.
Advanced PureAir Air Shield Owner’s Manual CLEANING AND MAINTENANCE Before starting any cleaning or maintenance, always turn-off and unplug the unit. Regular cleaning and maintenance is recommended every 2-3 months. Disassembling the Air Shield After unplugging, carefully lay the unit down face-up. Disassemble the unit in sequence of 1 to 5 as shown below.
Advanced PureAir Air Shield Owner’s Manual CLEANING AND MAINTENANCE ( CONT. ) Regular Cleaning and Maintenance Unit Body Front Face Plate Instructions regarding the disassembly of the Can be cleaned with flowing water face plate and filters refer to Please use a soft cloth to clean and avoid scraping page 7.
Advanced PureAir Air Shield Owner’s Manual CLEANING AND MAINTENANCE ( CONT. ) Cleaning and Maintenance of the Washable Plasma Dust Filter The Washable Plasma Dust Filter needs cleaning when: 1) The cleaning indicator is glowing or blinking. 2) The dust collector is making electrical discharge sounds.
Page 11
Advanced PureAir Air Shield Owner’s Manual CLEANING AND MAINTENANCE ( CONT. ) The Cleaning and Maintenance of the Washable Plasma Dust Filter (Cont.) 4. Clean the Plasma Dust Filter Use mild detergent or plain water only. Use a soft scouring pad or toothbrush to clean the dust collector.
Page 12
Advanced PureAir Air Shield Owner’s Manual CLEANING AND MAINTENANCE ( CONT. ) ION-UV INDICATOR CLEAN METAL GRID with ultra-violet technology QUIET REPLACE FILTER AUTO RESET CLEAN AIR MONITOR FLOW TIMER ODOR DUST ALLERGEN POWER ION-UV INDICATOR CLEAN METAL GRID with ultra-violet technology...
Or, because there has been pollution created indoors (e.g. smoking/pet boxes etc.) the whole time. It will take some time for the Air Shield to achieve a clean environment with only one indicator LED on. Why does the air quality surveillance function keep switching back and forth frequently? Sometimes the Irritant Sensor is affected by cell phone or other wireless equipment.
Page 14
Advanced PureAir Air Shield Owner’s Manual FREQUENTLY ASKED QUESTIONS ( CONT. ) Filter Why is it so hard for the filter to get rid of dust and odors? Have the front and back of the HEPA/Charcoal filter been mistakenly reversed? The HEPA/Charcoal filter has been saturated with a serious amount of dust.
In case of any malfunction, contact your retailer or email us at info@realspiritusa.com.. PRODUCT WARRANTY Advanced PureAir warrants the Air Shield air purifier to be free from manufacturing and material defects (excluding filters, lights, and batteries) for a period of one year from the original date of purchase.
Need help?
Do you have a question about the Air Shield and is the answer not in the manual?
Questions and answers