Printed Wiring Board Diagrams - Canon LV-5110U Service Manual

Printed Wiring Board Diagrams

(LV-5110U/E)
Power Board (SIDE:A)
Main Board
"K3C"
Main Board
"K3D"
Line Filter Board (SIDE:A)
Interlock
Switch
SW904
AC Cord
HIC Board (SIDE:A)
Main Board "K1"
A10
CAUTION
This projector is isolated from AC line by using the internal converter transformer.
Please pay attention to the following notes in servicing
1. Do not touch the part on hot side (primary circuit) or both parts on hot and cold sides (secondary
circuit) at the same time.
2. Do not shorten the circuit between hot and cold sides.
3. The grounding lead must be connected to the ground of the same circuit when measuring of volt-
ages and waveforms.
SW902
(Thernal SW)
HIC Board "K1A"
Lamp
Ballast
Unit
Audio Amp Board (SIDE:A)
Main Board
"K5S"
Main Board
"K5A"
Temp Board (SIDE:A)
Main Board
"K8D"
Power Board (SIDE:B)
Line Filter Board (SIDE:B)
HIC Board (SIDE:B)
Audio Amp Board (SIDE:B)
Temp Board (SIDE:B)