Sony BDP-CX960 Operating Instructions Manual page 66

66
us
Sets the color for video signals output from
the HOMI OUT jack. Select the setting that
matches the connected TV type.
Auto Automatically detects the
- -
connected TV type, and
switches to the matching
color setting.
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
signals.
RGB (16-235) Select this when connecting
to a device that only
supports RGB limited range.
RGB (0-255)
Select this when connecting
to an RGB (0-255) device.
Sets whether to send xvYCC information to
the connected TV.
Combining xvYCC-compatible video with a
TV that supports x. v.Color display accurately
reproduces object colors present in nature.
Auto Normally select this.
Off
Select this when the picture
is unstable or colors appear
unnatural.
Sets the picture mode for OVO playback
pause status. For BO-ROMs, "Pause Mode"
automatically switches to "Auto."
Auto Normally select this.
- -
Dynamic moving pictures
appear without blurring.
Frame Displays static pictures at
high resolution.
~» Audio Settings
The default settings are underlined.
Selects the jack type to output audio signals.
2-channellinear PCM signals are output at
48 kHz maximum from output jacks other
than the priority jacks.
HOM I
Outputs audio signals from
- -
the HDMI OUT jack.
Coaxial/
Outputs audio signals from
Optical
the DIGITAL OUT
(OPTICAL/COAXIAL)
jack.
Stereo Analog Outputs audio signals from
the AUDIO OUT (L/R)
jacks.
Selects the signal type for the HOMI OUT
jack.
Auto Normally select this.
- -
Outputs audio signals
according to the status of the
connected HDMI device.
2ch PCM
Downmixes to 2-channel
Linear PCM signals before
outputting from the HDMI
OUT jack.
"
S elect "2ch
peM"
when connecting a TV or an AV
amplifier (receiver) that does not support Dolby
Digital or DTS, otherwise noise or no sound may
result.
Selects whether to mix or not mix interactive
audio and secondary audio (commentary)
when playing a BO that contains such audio.
Mix
Mixes the interactive and
-
secondary audio as primary
audio.
Direct
Outputs the primary audio
only.