Sony BDP-CX960 Operating Instructions Manual page 60

Changing the Command
Mode
When you have more than one Sony Blu-ray
disc/DVD player, the supplied remote may
interfere with another player. In this case,
change the command mode for this player
and the supplied remote to one that differs
from the other player.
The default command mode for this player
and the supplied remote is BDl.
Number
buttons
""-r--
ENTER
.
~~-
POP UP/
MENU
./+/+/./
e
HOME
-4-_=....
To switch the command mode for the
remote
Set the command mode for the remote so it
matches the command mode you set in step 6
above (for the player).
1
Press pOP UPIMENU while pressing
down BD.
2
While BD is flashing, enter the 3-digit
code number using the number buttons,
then press ENTER.
Command mode Code number
310
311
312
.~.
If the command mode for the player does not match
the remote, the command mode for the player
appears on the front panel display when you try to
operate the remote.
Press HOME to display the home menu.
Select
iii
(Setup) using +1+.
Select "System Settings" using
+1+,
and
press
e.
4
Select "Command Mode," and press
e.
5
Select a command mode (BD I, BD2, or
BD3), and press
e .
The display asks for confirmation.
6
Select "Yes," and press
e.
The command mode for the player is
changed to the one you set in step 5.
To switch the command mode for the
player
1
2
3
60
us