Control The Amount Of Water Supplied To The Icemaker; Water Supplying Time Control Option - LG GC-P207 Service Manual

HOW TO INSTALL REFRIGERATOR

3-2. Control the amount of water supplied to the icemaker.

Caution : • Please unplug the power cord from the wall outlet and wait for more than three minutes before disconnecting
PWB cover as 310V is applied in the control panel.
1. Disconnect PWB cover from the upper part of the refrigerator.
2. Adjust the amount of water supplied by using DIP switch.
I Water Supplying Time Control Option
TYPE-3(Dot-LED)
DIP SWITCH SETTING
No
S1 S2
1 OFF OFF
2 ON OFF
3 OFF ON
4 ON ON
5
6
7
8
1) The water supplying time is set at five seconds when the refrigerator is delivered.
2) The amount of water supplied depends on the setting time and water pressure (city water pressure).
3) If ice cube is too small, increase the water supplying time. This happens when too small water is supplied into the ice tray.
4) If ice cube sticks together, decrease the water supplying time. This happens when too much water is supplied into the ice tray.
Caution : When adjusting the amount of water supplied, adjust step by step. Otherwise the water may spill over.
Switch ON
Switch OFF
3. When adjustment of control switch for the amount of water supplied is complete, check the level of water in the ice tray.
TYPE-2(Bar-LED)
DIP SWITCH SETTING
WATER
SUPPLY TIME
S1
6.5 SEC OFF
5.5 SEC ON
7.5 SEC OFF
8.5 SEC ON
OFF
ON
OFF
ON
ON
1 2 3
Confirm the amount
of water
TYPE-1(88-LED)
WATER
SUPPLY TIME
S2 S3
OFF OFF 6.5 SEC
OFF OFF 5.5 SEC
ON OFF 6 SEC
ON OFF 7 SEC
OFF ON 7.5 SEC
OFF ON 8 SEC
ON ON 9 SEC
ON ON 10 SEC
- 20 -
(+) Driver
REMARKS
* The quantity of water
supplied depends on DIP
switch setting conditions
and water pressure as it
is a direct tap water
connection type. (the
water supplied is
generally 80 cc to 120 cc)
* DIP switch is on the main
PWB.
Optimum level