Settings Mode - Miele K 1801 Vi Operating And Installation Instructions

Switching on and off

Settings mode

You can select further settings in
settings mode and you can also select
certain appliance functions via the
control panel and adjust the settings.
The settings for the different functions
are described in more detail in the
relevant section of these instructions.
Overview of functions that can be
selected in settings mode:
Function
To enter or leave settings
mode
To select the
temperature unit
(see "The correct
temperature")
No function selected
To switch the sensor
tone on/off (see
"Switching on and off")
16
Switching the sensor tone on/off
The tone which sounds each time a
sensor is touched can be deactivated.
^ Touch the access sensor to highlight
Symbol
;
^ Touch the sensor for the refrigerator
†
^ Take note of the position of the X
^ Touch the access sensor until it is
;
=
^ Place your finger in the position of the
^ At the same time, briefly touch the
it in yellow.
zone so that it is highlighted in
yellow.
sensor (but do not touch it!).
highlighted in white and all of the
other sensors are no longer lit up.
X sensor, and leave it there.
access sensor (without moving your
finger from the X sensor).