Installation Without Base - Century 3-Point Instruction Manual

INSTALLATION
1
Place car seat rear-facing
2
Thread vehicle lap belt through car seat Slots
and buckle belt.
NOTE: Vehicle shoulder belt must NOT be
placed through car seat Slots.
3
Press down firmly on car seat to compress
vehicle seat cushion while tightening vehicle
lap belt (fig. a).
4
Pull front to back and left to right to check for
secure installation (fig. b). Vehicle lap belt
MUST stay tight.
If not secure, see "Vehicle Seat Belts" section.
5
Check level indicator on car seat.
Ball MUST be entirely in green zone (fig. c). If
necessary place rolled Towels under car seat
at vehicle seat crease.
NOTE: Vehicle must be on level ground and
child in car seat when leveling.
8
WITHOUT
on vehicle seat.
BASE
6
Adjust handle to a position behind car seat.