Panasonic SA-HT740P Service Manual page 10

SA-HT740P / SA-HT740PC / SA-HT740PX / SA-HT743P / SA-HT743PC / SA-HT940P / SA-HT940PC
Step 2 : Disconnect the connector (CN2013) and detach the
FFC (CN5707 and CN5705) then remove the Front Panel as
arrow shown.
4.2.4. Removal of Tray Assembly
· Follow the (Step 1) - (Step 3) of item 4.2.1.
· Follow the (Step 1) - (Step 3) of item 4.2.2.
· Follow the (Step 1) - (Step 2) of item 4.2.3.
Step 1 : Push and hold the Close Lock Gear and then push the
Tray Assembly as arrows shown.
Step 2 : Detach the FFC (CN5702).
Step 3 : Push and hold the claws at the both sides of the Tray
Assembly and Close Lock Gear at the same time to remove the
Tray Assembly as arrows shown.
4.2.5. Removal of Rear Panel
· Follow the (Step 1) - (Step 3) of item 4.2.1.
· Follow the (Step 1) - (Step 3) of item 4.2.2.
· Follow the (Step 1) - (Step 2) of item 4.2.3.
· Follow the (Step 1) - (Step 3) of item 4.2.4.
Step 1 : Remove 9 screws on Rear Panel.
10