Use Of Extension Cord - Hitachi FS 10SA Instruction Manual And Safety Instructions

USE OF EXTENSION CORD

Make sure your extension cord is in good condition. When using an extension cord,
be sure to use one heavy enough to carry the current your product will draw.
An undersized cord will cause a drop in line voltage resulting in loss of power and
overheating. Table shows the correct size to use depending on cord length and
nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the
gage number, the heavier the cord.
Ampere Rating
More Not More
Than Than
0 – 6
6 – 10
10 – 12
12 – 16
WARNING:
MINIMUM GAGE FOR CORD SETS
0 – 25
(0 – 7.6)
18
18
16
14
Avoid electrical shock hazard. Never use this tool with a
damaged or frayed electrical cord or extension cord.
Inspect all electrical cords regularly. Never use in or near water
or in any environment where electric shock is possible.
Total Length of Cord in Feet (Meter)
26 – 50
(7.9 – 15.2) (15.5 – 30.5)
AWG
16
16
16
12
51 – 100 101 – 150
(30.8 – 45.7)
16
14
14
Not Recommended
14
12
12
9