Safety; For Using All Power Tools - Hitachi FS 10SA Instruction Manual And Safety Instructions

INPORTANT SAFETY INSTRUCTIONS

FOR USING ALL POWER TOOLS

WARNING:
READ ALL INSTRUCTIONS
1. NEVER TOUCH MOVING PARTS.
Never place your hands, fingers or other body parts near the tool's moving parts.
2. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE.
Never operate this tool without all guards or safety features in place and in
proper working order. If maintenance or servicing requires the removal of a
guard or safety feature, be sure to replace the guard or safety feature before
resuming operation of the tool.
3. ALWAYS WEAR EYE AND EAR PROTECTOR.
Protect yourself from flying or expelled wood chips, metal particles or other
debris by using protective goggles or equivalent eye protector. Wear ear
protector to protect yourself from excessive noise.
4. PROTECT YOURSELF AGAINST ELECTRIC SHOCK.
Prevent body contact with grounded surfaces such as pipes, radiators, ranges
and refrigeration enclosures. Never operate the tool in damp or wet locations.
5. DISCONNECT TOOLS.
Never leave the tool connected to a power source. Always disconnect the tool
from its power source before servicing, inspecting, maintaining, cleaning and
before changing or checking any parts.
6. AVOID UNINTENTIONAL STARTING.
Don't carry the tool while it is connected to its power source. Don't carry the
tool with your finger near the power switch. Be sure the power switch is in the
'"off" position before connecting the tool to its power source.
7. STORE TOOL PROPERLY.
When not in use, the tool should be stored in a dry place. Keep out of reach of
children. Lock-out the storage area.
8. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite injuries. Clear all work areas and work
benches of unnecessary tools, debris, furniture, etc.
4

SAFETY

Death or serious bodily injury could result from improper or
unsafe use of power tools. To avoid these risks, follow these
basic safety instructions: