Important Safety Instructions; For Use Of The Orbital Sander; Replacement Parts; Polarized Plugs - Hitachi FS 10SA Instruction Manual And Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

FOR USE OF THE ORBITAL SANDER

WARNING:
1. NEVER apply water or lubricating oil, otherwise hazards from
electrical shocks may result.
2. ALWAYS operate the orbital sander safely for correct use.
3. ALWAYS securely installing the sanding paper.
4. ALWAYS wear a protective mask when operating the sander in confined
spaces.

REPLACEMENT PARTS

When servicing use only identical replacement parts.
Repairs should be conducted only by a Hitachi authorized service center.

POLARIZED PLUGS

To reduce the risk of electrick shock, this equipment has a polarized plug (one blade
is wider than the other).
This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
8
Death or serious bodily injury could result from improper or
unsafe use of disc grinder. To avoid these risks, follow these
basic safety instructions: