Sound Menu; Changing The Preset Sound Mode; Adjusting Sound Settings; Sound Settings - Samsung LN19C450 User Manual

Basic Features

Sound Menu

Changing the Preset sound Mode

¦
O
m → sound → Mode → EnTERE
MEnU
Mode
t
standard : Selects the normal sound
■
SLEEP
mode.
: Emphasizes music over voices.
Music
■
: Provides the best sound for
Movie
■
movies.
Clear Voice : Emphasizes voices over other sounds.
■
Custom : Recalls your customized sound settings.
■

Adjusting sound settings

¦
O
MEnU m → sound → Equalizer → EnTERE
Equalizer
Adjusts the sound mode.
Mode : Selects the sound mode among the predefined
■
settings.
Balance l/R : Adjusts the balance between the right and
■
left speaker.
100hz / 300hz / 1Khz / 3Khz / 10Khz
■
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Reset : Resets the equalizer to its default settings.
■

sound settings

¦
O
MEnU m → sound → EnTERE
sRs Trusurround hD (Off / On)
SRS TruSurround HD is a patented SRS technology that
solves the problem of playing 5.1 multichannel content
over two speakers. TruSurround delivers a compelling,
virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is
fully compatible with all multichannel formats.
16
English
Preferred language
(digital channels only)
Digital-TV broadcasts are capable of
simultaneous transmission of many
audio tracks (for example, simultaneous
translations of the program into foreign
languages).
✎
You can only select a language among the ones being
broadcasted.
S.MODE
Multi-Track sound (MTs)
(analog channels only)
Mono
■
broadcasting in mono or if you are
having difficulty receiving a stereo signal.
stereo
■
broadcasting in stereo.
sAP
■
which is usually a foreign-language translation.
✎
Depending on the particular program being broadcast,
you can listen to Mono, stereo or sAP.
Auto Volume (Off / On)
Because each broadcasting station has its own signal
conditions, the volume may fluctuate each time channel
is changed. This feature lets you automatically adjust the
volume of the desired channel by lowering the sound output
when the modulation signal is high or by raising the sound
(Bandwidth
output when the modulation signal is low.
speaker select
(External speaker / TV speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External speaker.
✎
When
volume and
sound settings will be limited.
✎
When
should use these settings.
x
✎
When
should use these settings.
x
✎
If there is no video signal, both speakers will be mute.
P
MEDIA.P
P.MODE
SLEEP
: Choose for channels that are
: Choose for channels that are
: Choose to listen to the Separate Audio Program,
SLEEP
speaker select is set to External speaker, the
buttons will not operate and the
MUTE
speaker select is set to External speaker, you
TV speaker: Off, External speaker: On
speaker select is set to TV speaker, you
TV speaker: On, External speaker: On
S.MODE P
S.MODE P