Using Favorite Channels; Memorizing Channels; Editing Channels; Other Features - Samsung LN19C450 User Manual

Basic Features

Using Favorite Channels

¦
O
m → Channel → Channel list → EnTERE
MEnU
Add to Favorite / Delete from Favorite
*
Set channels you watch frequently as
Favorites.
1. Select a channel and press the
button.
2. Add or delete a channel using the Add
to Favorite or Delete from Favorite
menu respectively.
6
6-1
7-1
8
9
9-1
10
10-1
11-1
Air Zoom
B

Memorizing channels

¦
O
m → Channel → EnTERE
MEnU
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
: Air antenna signal.
Air
■
: Cable antenna signal.
Cable
■
: Air and Cable antenna.
Auto
■
12
English
TOOls
Air
♥ TV #6
SLEEP
♥ TV #7
Delete
Add to Favorite
Air
Timer Viewing
Air
Select All
♥ TV #9
Auto Program
Air
♥ TV #10
♥ TV #11
Select T Tools ► Next Program
C
t
MEDIA.P
✎
nOTE
x
When selecting the Cable TV system: Selects the
cable system. sTD, hRC and IRC identify various
types of cable TV systems. Contact your local cable
company to identify the type of cable system that
t
exists in your particular area. At this point, the signal
source has been selected.
x
After all the available channels are stored, it starts
to remove scrambled channels. The Auto program
menu then reappears.
how to stop Auto Programming
1. Press the EnTERE button.
2. A message will ask stop Auto Program? Select Yes by
pressing the ◄ or ► button.
3. Press the EnTERE button.

Editing channels

¦
O
MEnU
Channel name Edit
1. Select a channel and press the
2. Edit the channel name using the Channel name Edit
menu.
Channel name Edit
■
own channel name.

Other Features

¦
O
MEnU
Clear scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
how to stop searching scrambled Channels
1. Press the EnTERE button to select stop.
2. Press the ◄ button to select Yes.
3. Press the EnTERE button.
✎
This function is only available in
Channel list
O
MEnU
Channel list Option Menu
Set each channel using the Channel List menu options (Add/
Delete, Timer Viewing, select All/ Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the
2. Select a function and change its settings.
S.MODE
m → Channel → Channel list → EnTERE
t
TOOls
(analog channels only): Assign your
m → Channel → EnTERE
Cable mode.
m → Channel → Channel list → EnTERE
t
TOOls
P.MODE
button.
button.