Healthrider HRTL14508.0 User Manual page 24

HOW TO ADJUST THE TELEVISION SETTINGS
You must use your remote control to adjust television
settings. Press the Menu button to enter the main
menu or to return to a previous menu. Press the Exit
button to exit a menu. Press the Channel (CH) in-
crease and decrease buttons to navigate up and down
in a menu and the Volume (VOL) increase and de-
crease buttons on your remote control to navigate right
and left.
1. Press the Menu button to enter the main menu.
To select one of the
icons across the top
of the screen, press
the Volume increase
and decrease but-
tons on your remote
control until the de-
sired icon appears
larger than the others. Select the monitor to adjust
the image settings. Select the speaker to adjust the
audio settings. Select the clock to adjust the time
settings. Select the gear to adjust the television
settings. Select the antenna to locate and save
channels. To return to the main menu, press the
Menu button repeatedly.
2. Adjust the image settings.
Select the personal, standard, dynamic, or soft pic-
ture mode. The contrast, brightness, color, sharp-
ness, and tint will automatically adjust. You can
also manually adjust the contrast, brightness, color,
sharpness, or tint.
3. Adjust the audio settings.
Select the personal, standard, movie, or music
sound mode. The bass, treble, and balance will au-
tomatically adjust. You can also manually adjust the
bass, treble, balance, or audio language. Select an
audio language to hear programs in the selected
language. Note: The audio language setting will
function only if another audio signal is available.
Personal
Picture Mode
Contrast 50
50
Brightness
50
Color
Sharpness 50
0
Tint
UP/DOWN ADJUST "MENU": EXIT
4
24
4. Adjust the time settings.
Adjust the OSD (on-screen display) duration, sleep
timer, time zone, or daylight savings time settings.
The clock will display the current date and time and
is reset every time the power is turned on. The
OSD duration is the length of time indicators (like
channel number or the electronic program guide)
will remain on the screen after they appear. If you
set the sleep timer, the television will turn off after
the indicated number of minutes. A countdown will
warn you when the television is about to turn off.
Note: The time zone setting, daylight savings time
setting, and clock are only available when viewing
digital television.
5. Adjust the television settings.
Adjust the language used in the menus, the trans-
parency of the menu, the color mode, or the closed
caption settings. You can also restore the original
television settings.
To enter the closed
caption submenu,
highlight CLOSED
CAPTION and press
the Volume increase
button on your re-
mote control. In the
closed caption sub-
menu, adjust the closed caption mode, the basic
selection, and the advanced selection.
When you highlight
RESTORE SETTING
and press the
Volume increase but-
ton, a confirmation
request will appear in
the display. Use the
Volume increase or
decrease button to
select YES or NO and press the Channel increase
or decrease button to confirm your selection.
Select YES to restore the original television set-
tings or NO to keep the current settings.
CC Mode
Off
Basic Selection CC1
Advance Selection Service 1
UP/DOWN ADJUST "MENU": EXIT
Are you sure?
NO
YES
SELECT
CONFIRM