GE Profile PTWN8055MMS Technical Service Manual page 25

9. With the hinge pin positioned completely to the
left, lift left side of the lid to clear the pin. (When
clear, release the needle nose pliers and the
spring loaded hinge pin will snap to extended
position.)
10. Lower the top cover to the cabinet.
11. Remove the tape.
12. Open, and then pull lid to the left to disengage
the right side hinge pin from the bushing in the
top cover.
13. Lift and remove lid from the top cover.
Note: Lid is only available as an assembly.
Bushing
Hinge Pin
To replace the lid:
1. Place the lid in the open position, and then insert
the right side hinge pin into the bushing in the
top cover.
2. Use a putty knife to press the left side hinge pin
into the hinge assembly.
3. Lower left side of the lid into position, and
remove putty knife. Allow pin to enter the
bushing in the lid.
– 25 –
Bushing
Hinge Pin