OPERATION AND FUNCTIONS
10. Forced Defrosting
1. "FRZ. SET" Button
2. "REF. SET." button
3. "LOCK" button
1. How to start
Set "LOCK ON" first, then push "REF. SET" button 5 times
while pushing "FRZ. SET" button simultaneously.
2. How to proceed
1) Delete Pre-cool mode. (Others are same as normal defrosting.)
2) Heater is ON regardless of D-sensor temp. at first 30 seconds.
( Check of defrosting current)
11. Initial Defrosting
D-sensor
Initial or first power input (power plugin)
If D-sensor temp.
power input.
12. Buzzer or Alarm
F-PCB buttons
Door Switch
Initial Power Input
1. Buzzer sounds if any button of F-PCB is pushed.
2. Buzzer sounds 4 times, 3 seconds after initial power input.
3. Buzzer sounds 3 times in case of A/S forced defrosting, 1 time
in case of Pull Down operation.
4. If door is open, buzzer sounds every 1 minute for 5 minutes.
(Door open alarm)
13. LCD Background Light
F-PCB buttons
Door Switch
Initial Power Input
INPUT
CONTENTS
INPUT
CONTENTS
3.5
, defrosting mode starts from Pre-cool at first
C
INPUT
CONTENTS
INPUT
Control Object
Defrosting Mode
Control Object
Defrosting Mode
Control Object
BUZZER
Control Object
LCD BACK LIGHT
31
REMARKS
REMARKS
Comp. is delayed for 6 min.
at the initial defrosting.
REMARKS