Sony DPP-FP97 Operating Instructions Manual page 45

o
m
u
"'C
...
S'
-
S '
(Q
I
High-definition television
To an HDMI input connector
To the HOMI OUT connector
While the printer outputs signals to the
television, the printer LCD screen goes
off.
3
Switch the TV input.
When the printer is connected to a
television and then the printer power is
turned on, a television supporting
HDMI
control function switches the input
automatically to the printer and displays
the printer pictures on the monitor. When
the television is on the standby mode, the
television power is also turned on.
• Use an HDMI cable shorter than 3m in
length.
• Use an HDMI cable acquiring the HDMI
logo.
2
Connect the printer HOMI OUT
(output) connector to a HOMI input
connector of a television.
Use a commercially available
HDMI
cable to
connect the HDMI OUT connector (A Type) of
the printer to an
HDMI
input connector of a
television.
The printer supports the
HDMI
(High-
Definition Multimedia Interface) output. By
connecting the printer to a television equipped
with an
HDMI
input, you can view higher
precision photos on the television and perform
printing operations.
1
Prepare a commercially available
HOMI cable.
Connecting to a High
Definition television and
Printing
• We cannot guarantee operations with all types of
televisions.
• If the HDMI control setting of your television is
off, the television input does not switch
automatically. Settings differ depending on the
television you use. For details, refer to the manual
supplied with your television.
• If "CONTROL FOR HDMI" is set to "Off," the
input will not switch automatically (page 44).
Continued
45
GB