Advertisement
Placement
The display unit can be wall-mounted using the integrated hang-hole, or it can be
placed on a desk or table using the fold-out stand. The outdoor sensor can also be wall-
mounted.
The outdoor sensor is weather resistant. Keep out of direct sunlight and direct weather
elements to extend the life of the unit. Also, when selecting a location for the display
unit, make sure it is within 100 feet (33 meters) of the outdoor sensor. The range may
be affected by electronic interference from devices such as televisions and computers.
For the best results, keep both units at least 3 feet (0.9 meters) away from any electrical
equipment or devices that may cause electronic interference.
TV
Specifications
TEMPERATURE RANGE
WIRELESS RANGE
OPERATING FREQUENCY
POWER
DATA REPORTING
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
AT
LEAST
IN
OUT
3
(0.9 m)
APART
(100 feet maximum)
Outdoor: -40°F to 158°F
Indoor: 32˚F to 122˚F
100ft / 33 m depending on home construction
materials
433 MHz
Display: 2 x AAA alkaline batteries
Sensor: 2 x AAA alkaline or lithium batteries
60 second updates
(33 meters)
Advertisement
