AcuRite 782 Instruction Manual

Congratulations on your new AcuRite product. To ensure the best possible product
performance, please read this manual in its entirety and retain it for future reference.
Features & Benefits
1 2

Install or Replace Batteries

AcuRite recommends high quality alkaline batteries
for the best product performance. Heavy duty or
rechargeable batteries are not recommended.
The outdoor sensor requires lithium batteries in low
temperature conditions. Cold temperatures can
cause alkaline batteries to function improperly.
Use lithium batteries in the outdoor sensor for
temperatures below -4˚F.
Slide off the battery compartment cover on the
back of each unit. Insert 2 x AAA batteries into
the display first, then the outdoor sensor next. Follow the polarity (+/−) diagram in the
battery compartment. Replace battery cover.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly.
Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals. Battery contains mercury. Do not put in trash. Recycle or manage as hazardous waste.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Wireless Weather Thermometer
DISPLAY UNIT
3
1. Current Indoor Temperature
2. Current Outdoor Temperature
OUTDOOR SENSOR
3. Wireless Signal Indicator
Instruction Manual
Flashes when data is being sent to the
display unit.
model 00782
BATTERY SAFETY: