Other Functions; Changing The Sound Settings; Adjusting The Sound Characteristics - Bal/Fad/Lpf/Sub; Customizing The Equalizer Curve - Sony CDX-V4800 Operating Instructions Manual

Other functions

Changing the sound settings

Adjusting the sound
characteristics — BAL/FAD/LPF/
SUB
You can adjust the balance, fader, low pass filter
and subwoofer volume.
1
Press the select button repeatedly
until "BAL," "FAD," "LPF" or "SUB"
appears.
The item changes as follows:
LOW* t MID*
1
BAL (left-right) t
FAD (front-rear) t
LPF (low pass filter)*
SUB (subwoofer volume)*
AUX (AUX level)*
*1 When EQ3 is activated (page 10).
*2 The subwoofer cut-off frequency is adjustable
to 78 Hz, 125 Hz or OFF.
*3 When the audio output is set to "SUB"
(page 10).
"ATT" is displayed at the lowest setting, and can
be adjusted up to 20 steps.
*4 When AUX source is activated (page 12).
2
Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.

Customizing the equalizer curve

— EQ3

"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press (EQ3)
repeatedly to select "CUSTOM."
2
Press the select button repeatedly
until "LOW," "MID" or "HI" appears.
3
Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
10
t HI* t
1 1
t
2
3 t
4
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.

Adjusting setup items

The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
Setting the AUX source display or
switching SUB/REAR audio output
1
Press (OFF).
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the volume control dial to
select the setting.
AUX
To turn the AUX source display "AUX-ON" (
or "AUX-OFF" (page 12).
SUB/REAR
To switch the audio output.
– "SUB-OUT" ( ): to output to a subwoofer.
z
– "REAR-OUT": to output to a power amplifier.

Setting other items

1
Press the select button and the
desired button simultaneously.
Press Setting items
(3)
A.SCRL
To scroll long displayed items
automatically when the
album/track is changed.
– "ON": to scroll.
– "OFF" (
(4)
DEMO*
To set "DEMO-ON" (
"DEMO-OFF."
(6) BEEP
To set "BEEP-ON" (
"BEEP-OFF."
(MODE) PAL/NTSC*
To change the TV colour
system to PAL (
)
z
(Auto Scroll)
): to not scroll.
z
(Demonstration)
) or
z
) or
z
) or NTSC.
z