Setup; Memory 1, 2, 3 - AEG LAVAMAT 86810 User Information

– or turn the programme knob to
the spin speed if necessary and press the
water is drained and the washing spun).

Setup

The special functions that can be set under Setup remain permanently
stored independent of each washing cycle – even after the appliance
has been switched off or the mains plug has been removed from the
socket.

Memory 1, 2, 3

Program combinations can be stored at program knob positions ME-
MORY 1, 2, 3 and can then be selected directly using the program knob.
To do this the desired program combination is first put together and
then stored.
Setting the Memory
Example: Program position
MEMORY 1 is to be given the
following program combina-
tion: LINEN/EASY-
CARES 40 °C, 800 rpm, with
PREWASH.
1. Turn the program knob to LI-
NEN/EASY-CARES.
2. Press the TEMPERATURE key repeatedly, until 40 °C appears in the dis-
play.
3. Press the
4. Using the OPTION key set
bar appears under the PREWASH symbol
5. Press the
6. Press the OK key. The display
changes to the Special Func-
tions level. Program memory
position MEMORY 1 is of-
fered first.
3
To change to another memo-
ry position, press the
OPTION key.
RPM key repeatedly, until 800 appears in the display.
OPTION key repeatedly, until the SETUP symbol
OFF and then to
LINEN/EASY CARE
Cycle end at
40C 800 aýýýýýVýaýaýaýaýaýaýaýa
t u
PREWASH and press the OK key. A black
.
Memory 1
Store program
aýýýýýaýaýaýaýBýaýaýaýa
t u
SPIN. Change
START/PAUSE key (the
12.45
14.37
o O
flashes.
o O
z
z
19