Swing Operation - Haier AS12SH1ERA Operation Manual

Operation
Select TEMP.setting FAN Operation
AM
SMART
2
FAN Operation
Press FAN SPEED button. For each press, fan speed
changes as follows:
MED
LOW
Unit will run at selected fan speed.
4
1
Press TEMP.setting
Press TEMP button.
Every time the button is
pressed, temp. setting
o
increases 0.5 C.
Every time the button is
pressed, temp. setting
o
decreases 0.5 C.
Unit will start running to reach
the temp.setting on LCD.
HI
AUTO

SWING Operation

1
Up and down air flow direction
For each press of "
air flow direction on remote
controller displays as follows
AM
according to different operation
modes:
SMART
COOL/DRY:
HEAT:
SMART:
Initial state
2
Left and right air flow direction
For each press of "
displays as follows:
remote controller:
Initial state
When humidity is high,condensate water might occur at
air outlet if all vertical louvers are adjusted to left or right.
It is advisable not to keep horizontal flap at downward
position for a long time in COOLor DRY mode ,
otherwise, condensate water might occur.
As cold air flows downward in COOL mode, adjusting
air flow horizontally will be
better air circulation.
" button,
" buttor,remote controller
much more helpful for a