Assembly - LEHR BV025HH Operator's Manual

ASSEMBLY

BLOWER MODE
NOTE: Place the unit on the ground or on a work
bench to make attachment installation or removal
easier.
1. Install blower attachments in sequence shown, aligning
the grooves on the nozzles with the pegs (Fig. 7).
2. Slide the nozzles onto the pegs.
3. Twist the nozzles clockwise to lock in place.
NOTE: Make sure the Cage Screw is tightened down.
VACUUM / MULCHER MODE
1. Loosen the Cage Screw and pull down the Cage (Fig. 8).
2. Install vacuum attachments in sequence shown, aligning the grooves on the nozzles with the pegs.
3. Slide the nozzles onto the pegs.
4. Twist nozzles clockwise to lock in place.
5. Secure Mulch Collection Bag onto the Mulch Collection Bag Adapter by strapping down the Velcro Strap.
Place the shoulder strap over your left shoulder and adjust the Shoulder Strap Adjustment as necessary.
Shoulder
Strap
Adjustment
Velcro
Strap
Peg
Groove
Blower Nozzle
Peg
Groove
Mulch Collection
Bag Adapter
Mulch Collection Bag
Fig. 8
Peg
Groove
Blower Nozzle
Extension
Fig. 7
Peg
Groove
Vacuum Nozzle
Cage
Cage Screw
WARNING:
TO AVOID SERIOUS INJURY AND DAMAGE
TO THE UNIT, SHUT OFF THE UNIT BEFORE
REMOVING OR INSTALLING ATTACHMENTS.
LEHR |
ALL RIGHTS RESERVED 2009-2010
Groove
Peg
Extension
Vacuum Nozzle
Cage
Screw
Cage
9