Qumi
Ver.02
Delta Elec. Inc.
5-3. Started with Download
The section is to illustrate the procedure to upgrade the application software of a DLP
projector.
Step 1: Power on the projector, press the "power" button one time by remote control, then
press "UP" "RIGHT" "DOWN" "LEFT" button on the keypad or on the remote control, the
below OSD menu will display:
Step 2: Select the "USD Mode", press "Right" key oh the keypad or remote control, select
the "DDP6401".
Company Confidential
Vivitek ______________________
Delta____________
34
2011/07/05