Table of Contents
Advertisement
Delta Elec. Inc.
5
You can use the cursor buttons ▲▼◄►
either on keypad or IR remote control for
password entry. You can use any
combination including the same arrow five
times, but not less than five.
Press the cursor buttons in any order to set
the password. Push the MENU button to
exit the dialog box.
6.
The password confirm menu appears
when you power on the Qumi when the
Security Lock is enabled.
Enter the password in the order you set it
at step 5.
Forget the password recovery (only used in the service center not to be in the end-user side)
7.
Still pressed "MENU" key and plug the AC power cord when Power LED going to flashing=>
Phase a short time =>flash three times.
Company Confidential
42
Qumi
Vivitek ______________________
Ver.02
Delta____________
2011/07/05
Advertisement
Table of Contents
