Related Manuals for Coopers 9487
Summary of Contents for Coopers 9487
- Page 1 Petrol Hedge Trimmer Instructions 9487 Please read these instructions thoroughly before starting and ensure you are familiar with the operation of your new Petrol Hedge Trimmer.
-
Page 2: Safety First
Contents Contents Parts location Specifications Warning labels on the machine 4 Symbols on the machine Warning for safe operation Safety information Fuel Operation Cleaning & maintenance EC Declaration of Conformity WARNING SYMBOLS SAFETY FIRST Warning Instructions contained in This mark indicates instructions which must be warnings within these followed in order to prevent accidents which instructions marked with a... -
Page 3: Specifications
Parts location, description and specification 5. Blade 1. Front handle 11. Fuel tank cap 8. Starter knob 10. Fuel tank 12. Choke lever 7. Exhaust 2. Rear handle 13. Air cleaner cover 6. Gear case 4. Throttle lever 14. Spark plug cap 3. -
Page 4: Warning Labels On The Machine
Warning labels on the machine Warning labels on the machine Warning labels on the machine Important (1) Read manual before operating this machine If the warning label peels off or becomes (2) Wear head, eye and ear protection. soiled and impossible to read, you should (3) Handling this machine improperly could result in contact the dealerfrom which you accidents causing serious injury or death. -
Page 5: Warnings For Safe Operation
Warning for safe operation Warnings for safe operation BEFORE STARTING THE ENGINE 1. The area within a perimeter of 50ft (15m) of the person using the product Vibration Warning! should be considered a hazardous area into which no one should enter. If necessary yellow warning rope or warning signs should be placed around Prolonged use of hedge trimmers or any other machine the perimeter of the area. -
Page 6: Safety Information
Safety information SAFETY INFORMATION: 1. This machine can cause serious injuries. Read the instructions carefully so you know how to use it correctly: 2. Make yourself familiar with all the components on the machine and how to use it properly. 3. -
Page 7: Additional Safety Instructions
Safety information ADDITIONAL SAFETY INSTRUCTIONS: 1. Store the machine in a safe place. Carefully open the fuel tank cap beforehand to release any pressure that may have built up in the tank. 2. Start the machine at least 3m away from the refuelling site to avoid the possible risk of fire. -
Page 8: How To Mix Fuel
WARNING • 2-stroke oil is supplied by Coopers of Stortford 1. Select bare ground for fueling. www.coopersofstortford.co.uk 2. Move at least 10ft (3m) away from the fueling point before starting the engine. -
Page 9: Operation
Operation OPERATION: Starting the engine • Feed fuel into the fuel tank and tighten the cap securely. • Rest unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start moving upon starting the engine. •... -
Page 10: Cleaning And Maintenance
Cleaning & maintenance CLEANING & MAINTENANCE: • Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. •... -
Page 11: Storage And Transportation
STORAGE AND TRANSPORTATION WARNING! Aged fuel is one of major causes of engine starting failure. Before storing the Make sure that the engine has stopped and is cool before performing and service unit, empty the fuel tank and run the engine until it uses all the fuel left in the to the machine. -
Page 12: Ec Declaration Of Conformity
EC Declaration of Conformity EC DECLARATION OF CONFORMITY We The Enterprise Department Ltd t/a Coopers of Stortford of 11 Bridge Street, Bishop’s Stortford, Hertfordshire, UK. CM23 2JU in accordance with the following Directive(s): 2006/42/EC MACHINERY DIRECTIVE 2004/108/EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE...
Need help?
Do you have a question about the 9487 and is the answer not in the manual?
Questions and answers