General Information - Ikelite iTTL Instruction Manual

General Information

The Ikelite iTTL Adapter is for use with Non-Ikelite housings with a TTL
hotshoe & Nikonos-style bulkhead. The hotshoe must have all 5 wires
connected. Refer to housing specifications or contact housing
manufacturer for connector style and wiring information.
The Adapter offers both TTL and Manual operation. Exposure
compensation is not provided through the Adapter, but can be accessed
via the camera's menus.
The Ikelite iTTL Adapter is compatible with the following Digital
Cameras; Nikon D40, D50, D70, D70s, D80, D200, D300, D300s, D700,
D3000, D5000, D60, D90, and Fuji S5 Pro.
The Ikelite iTTL Adapter is NOT compatible with the following Nikon
Cameras; D-100, D-1X, D-2X, D-2H.
Connecting Adapter to Housing Bulkhead
- Make sure all components are dry.
- Clean and lightly lubricate the threads and o-ring on the male Nikonos
connector. Use ONLY Ikelite lube. Other brand lubricants can cause the
o-ring to swell and not seat properly. Check o-ring for cracks or nicks.
- Properly align the Adapter's male Nikonos connector and insert it into the
housing's Nikonos-style bulkhead.
- Hand tighten the knurled ring on the Nikonos connector until there is no
in-out movement between connector and housing bulkhead.
2