Operating Your Hearing Instrument; Programmable Features; Wireless Functionality - Siemens 11X0123456R User Manual

Operating Your Hearing
Instrument–
Refer to the feature card included with this manual to
determine the programmable features your hearing
instrument is equipped with. Programmable features
are listed on the right column of the feature card (fig 11):
Use the
type of
battery
shown
below
OPTIONAL FEATURES
Volume control
Learning volume preference
Program button
Directional microphone
Telecoil
AutoPhone
ePocket
PROGRAMS
Program number
1
2
3
4
Refer to the ITE User Manual for information on
Optional Features and Programmable Features.
Fig. 11: FEATURE CARD
Programmable features section circled

Wireless Functionality

Your hearing instrument may be equipped with wireless
functionality. This provides synchronization between
two hearing instruments. If you change the program or
volume on one instrument, the other is automatically
changed. In addition, wireless technology automatically
adjusts the system to change both hearing instruments
simultaneously to adapt to different listening situations.
The wireless functionality also enables use of an optional
remote control.
24

OPERATING YOUR HEARING INSTRUMENT-

Programmable Features

IN-THE-EAR
FEATURE
CARD
Programmable
Program button
Microphone
Microphone
Battery
compartment door
Volume control
Features
Vent
PROGRAMMABLE
FEATURES
e2e wireless ®
Push button on/off
Power on delay
Low battery indicator
Volume control
®
alert tones
® remote control
Program change
alert tones
Listening environment
PROGRAMMABLE FEATURES
Note: The performance of the e2e wireless® could be temporarily
affected when in close proximity to electromagnetic noise
sources, such as a computer monitor or television. Move away
from the noise source if you experience difficulty.
Technical information for e2e wireless function:
Operating frequencies: flow = 115 kHz, fhigh = 120 kHz; Rated H-field
strengh (maximum): –11,5 dB µA/m at 3 meters.
This Category II radiocommunication device complies with Part 15
of the FCC Rules and Industry Canada Standard RSS-310. Operation
is subject to the following two conditions: (1) this device may not
cause interference,and (2) this device must accept any interference,
including interference that may cause undesired operation of
the device.
This Class B digital apparatus II radiocommunication device complies
with Part 15 of FCC Rules and Industry Canada Standard RSS-210.
Operation is subject to the following two conditions: (1) this device
may not cause interference,and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device.
The above applies to CIELO® 2, ARTIS® 2, ACURIS® and CENTRA®.
All other remote control compatible receiver-in-canal hearing
instruments use e2e wireless 2.0.
Technical information for e2e 2.0 wireless function:
FCC: SGI-WL002ITE IC: 267AB-WL002
Operating frequency : Fc = 3.28 MHz; Maxium field strength: –7 dB
µA/m at 10m meters.
OPERATING YOUR HEARING INSTRUMENT-
25
PROGRAMMABLE FEATURES