Getting Started; Installation; Connecting An Antenna; Installing The Remote Control Batteries - Toshiba 42WL55A Owner's Manual

Getting started

Installation

Connecting an antenna

Optimum reception of color requires a good signal and will generally mean that an outdoor antenna must be used.
The exact type and positioning of the antenna will depend upon your particular area.
Your Toshiba dealer or service personnel can best advise you on which antenna to use in your area.
Before connecting the antenna cable, turn off all main POWER switches.
Before connecting the antenna cable, remove the back terminal cover (see page 11).
300 Ω twin-lead feeder
Antenna adaptor
(not supplied)
75 Ω coaxial cable
Plug
(not supplied)

Installing the remote control batteries

Remove the battery cover.
Insert two R03 (AAA) batteries matching the –/+
polarities of the battery to the –/+ marks inside the
battery compartment.
Caution:
• Dispose of batteries in a designated disposal
area. Do not throw batteries into a fire.
• Attention should be drawn to the environmental
aspects of battery disposal.
• Do not mix battery types or combine used
batteries with new ones.
75 Ω
antenna
terminal
75 Ω
antenna
terminal
Effective range
within 5 m
Notes:
• If the remote control does not operate correctly,
or if the operating range becomes reduced,
replace both batteries with new ones.
• If the batteries are dead or if you will not use the
remote control for a long time, remove the
batteries to prevent battery acid from leaking
into the battery compartment.
VHF and/or
UHF antenna
TV back view
9