Connecting A Computer; To Connect A Computer - Toshiba 42WL55A Owner's Manual

Equipment connections

Connecting a computer

• Before connecting PC and audio cables, remove the back terminal covers (see page 11).
• An analog RGB (15 pin) computer cable can be connected.

To connect a computer

Computer
Connect a PC cable from the computer to the RGB/PC terminal on the back of the TV.
The following signals can be displayed:
• VGA: VESA 640 x 480 @ 60 Hz • SVGA: VESA 800 x 600 @ 60 Hz • XGA: VESA 1024 x 768 @ 60 Hz
However, these signal formats are converted to match the number of pixels of the LCD panel.
Therefore, the TV may not display small text properly.
Notes:
• Some PC models cannot be connected to this TV.
• There is no need to use an adapter for computers with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured
depending on some signals. This is not the malfunction.
• If the edges of the picture are stretched, readjust the picture position adjustment in the PC Setting menu.
• Depending on the specification of the PC you are playing the DVD-Video on, and the DVD's title, some scenes may
be skipped, or you may not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC
terminal
11
6
1
38
Audio cable
for PC-to-TV
connection
Conversion adapter
Pin No.
1
2
3
15
4
10
5
5
6
7
8
TV right side view
RGB PC cable
(if necessary)
Signal name Pin No.
R
G
B
NC (not connected)
NC
Ground
Ground
Ground
TV back view
Mini D-sub
15 pin
Signal name
9 NC
10 Ground
11 NC
12 NC
13 H-sync
14 V-sync
15 NC