Asko D5233 Operating Instructions Manual page 31

Step 1. Fitting the dishwasher in place
1. Loosen the lock nuts on the dishwash-
er's two front steel feet using a /8 inch
(1mm) open-ended wrench. Screw the
lock nuts down as close to the floor as
possible.
. Adjust the height of the dishwasher
by turning the front steel feet with your
hands. Leave enough space to adjust
them later.
. Screw in the back foot completely by
turning the adjustment screw at the front
counterclockwise. Use a flat-bladed or
1/ inch nut driver.
a
Customer Care Center
1-800-898-1879
www.askousa.com
1