Audio and Video Connections
1.
Refer to the owner's manual of the external device as well.
2.
Before connecting the power source,
USB/SD Card Connection
1.
Insert the USB/SD card into the USB port on the right panel/the card slot on the left panel of the main unit.
Press and hold the Stop/USB button on the unit or the LCD Mode/USB button on the remote to enter source
mode. Press the Up/Down direction button to select USB/Card and then press ENTER to access.
2.
It takes a short while for the unit's reading data. After the device is detected, the screen will display the
working menu, press the direction buttons to select the desired file from the menu and press Play/Pause to
start playback.
Earphone Connection
Be sure that your unit is at low volume level before
connecting the earphones. Increase the volume gradually
for your comfortable listening.
CAUTION:
Hearing experts advise against the constant use of per-
sonal stereos played at high volume. Constant high vol-
ume use can lead to hearing loss. If you experience ring-
ing in the ears or hearing loss, discontinue use and seek
medical advise.
CONNECTIONS
ensure that all the connections are properly done.
14
To Earphone Jack