Electrical Connection - Miele F 5122 Ui Operating And Installation Instructions

Electrical connection

The appliance is supplied with a mains
cable and moulded plug ready for
connection to an a.c. single phase
220 – 240 V 50 Hz supply. Connection
should be made via a fused plug and
suitable switched socket which is easily
accessible after installation.
For extra safety it is advisable to install
a suitable residual current device
(RCD).
Connection should be made via a fused
plug and suitable switched socket
which is easily accessible. Do not
connect the appliance to the mains
electricity supply by an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Do not connect the machine to an
inverter such as those used with an
automomous energy source e.g. Solar
power. When switched on peak loads
in the system can cause the safety
switch off mechanism to be triggered.
This can damage the electronic unit.
The machine must be used with
so-called Energy saving devices
either. These reduce the amount of
energy supplied to the machine
causing it to overheat.
If the electrical connectionhas to be
changed, this must only be done by a
suitably qualified and competent
person.
29